Russell Mann Machinery, LLC

We never let a customer fail.
















Raptor Dual-Table Sawjet (SW138-SJ127-SWJ Series)
The SawJet is controlled by a FANUC Servo control system closely integrated with a 40mm ground ballscrew. This combination is designed to provide years of trouble-free operation and also provide the highest level of accuracy. Northwood’s interface software and machine control allows an operator to quickly load and run part programs, as well as perform other machine tasks.   In addition, Northwood’s industry-leading StoneVision(TM) 3.0 software, coupled with Alphacam(TM) software by Hexagon Manufacturing Intelligence, takes the difficulty and risk out of processing drawings or digitized data into machine toolpaths.

5-Axis CNC Sawjet for Saw, WaterJet, Saw Miter Cuts and WaterJet Miter Cuts

The SawJet is controlled by a FANUC Servo control system closely integrated with a 40mm ground ballscrew This combination is designed to provide years of trouble-free operation and also provide the highest level of accuracy. Northwood’s interface software and machine control allows an operator to quickly load and run part programs, as well as perform other machine tasks.   In addition, Northwood’s industry-leading StoneVision(tm) 3.0 software, coupled with Alphacam(tm) software by Vero Software, takes the difficulty and risk out of processing drawings or digitized data into machine toolpaths.

3-Axis CNC Sawjet for Saw, WaterJet, and Miter Cuts

Each tank comes with ballast, a leveling-capable tank/grate and a pre-loaded grating system. This proven system allows the SawJET to cut under water, a necessity when cutting difficult stone such as Dekton(tm)
Dual Table (SW138-SJ127-SWJ Series)
In addition to the saw-motor, the Saw Jet is equipped with an abrasive waterjet head from KMT Waterjet, and is powered by a 60,000 PSI Intensifier Pump. The garnet is fed from a pressurized reservoir to a motor-driven, metered feeder system proximate to the waterjet nozzle. The SawJet software automatically switches between the saw and waterjet as the condition demands and blends the two cuts as a product of an easy-to-follow calibration routine. In addition, Northwood’s industry-leading StoneVision(tm) 3.0 software, coupled with Alphacam(tm) software by Vero Software, takes the difficulty and risk out of processing drawings or digitized data into machine toolpaths.